+35932/969 169

office@zmm-tos.com

CU-502
CU-662
High quality accessories
Stock head
High quality execution
Monolithic body
Hardened gudeways
Previous Next
CU-502 CU-502
CU-662 CU-662
High quality accessories High quality accessories
Stock head Stock head
High quality execution High quality execution
Monolithic body Monolithic body
Hardened gudeways Hardened gudeways
Technical Parameters Units CU-502 CU-582 CU-662
Height of centers
mm 260 290 330
Swing over bed
mm 520 580 660
Swing over cross slide
mm 320 380 380
Swing in gap
mm 710 770 850
Bed width
mm 400 400 400
Distance between centers
mm 1000/1500/2000/3000 4000/5000/6000 1000/1500/2000/3000
4000/5000/6000
1000/1500/2000/3000
4000/5000/6000
Spindle bore
Ømm 72/80/104 Ø72; Ø80; Ø104 Ø72; Ø80; Ø104
Spindle nose
DIN55027 No. 8 (No. 11) No8, No11 No8, No11
Number of speed
No. 18 18 18
Spindle speed range
Ømm 11,2÷2000 11,2-2000 11,2-2000(9-1600)
Longitudinal feed range
rpm 0.039-24 0,039-24 0,039-24
Cross feed range
mm/rev 0.0195-12 0.0195-12 0.0195-12
Metric thread range
mm/rev 0,5-240 0,5-240 0,5-240
Inch thread range
mm 60-1/8 60-1/8 60-1/8
Module thread range
tpi 0,125-60 0,125-60 0,125-60
DP thread range
Module 240-0,5 240-0,5 240-0,5
Cross slide travel
mm 310 320 360
Top slide travel
mm 140 140 140
Quill diameter
mm 75 75 75
Quill travel
mm 250 250 250
Quill taper
Morse 5 5 5(6)
Coolant pump
kW 0.09 0.09 0.09
Rapid traverse
kW 0.55 0.55 0.55
Lubrication pump
kW 0.12 0.12 0.12
Main motor power
kW 5,5 (7,5) 7,5-11 11


 

  Standard Accessories & Equipment Optional Accessories & Equipment
  Main Motor
  Spindle bore
  Spindle nose DIN 55027
  El. Cabinet with control panel
  Centralized lubrication system
  Coolant system with pump
  Digital Read Out
  Low voltage machine lamp 12V
  One position longitudinal stop
  Monolith cast iron body and gap
  Back plate for universal chuck
  Full length rear splash guard
  Drive plate with turnning dogs
Tool holder protection screen
 Splash guard for the chuck
  Drill chuck
 Protection of the lead shaft and screw
  Foot brake pedal
 "V" belts set
  Increasing of the main motor power
 Leveling bolts - set
  Quck chabge tool post MultiFix
 Hexagonal wrenches set
  Electro-dynamic brake
 Dead centre for spindle
  Tailstock dead centre
 Reduction sleeve for the spindle
  Reduction sleeve for the tailstock
 Rapid traverse of the apron in 4 directions
  Cam-lock spindle execution



 

JoomShaper